100bikes
Wore out three sets of tires already!
Thanks to all who responded to my request for information on the rare head badge.
Also, thanks for the inquiries and purchase offers as well.
I have decided to put it up for sale thru DoND.
As I (now)realize the rarity of this badge, I wanted to give anyone with interest a chance
to own it.
I will look at all offers thru:
8 pm on Saturday 1/27/2024.
Assume "No Deal" until that time.
Collected from your information :
Northwest Patrol Head Badge
Arnold, Schwinn and Co.
Chicago
USA
Here is the information I have collected:
Schwinn badge from the prewar period. Schwinn mostly stopped using the oval
badges in ‘35, but you occasionally see them on ‘36 or even 1937.
So, most likely from ‘32-‘35(Thanks Onecatahula)
Pre-World War II
Brass base
Nickle plate with copper and paint
Long Dimension : 68mm
Short Dimension: 39mm
Holes C to C: 56mm
Top screw hole shows removal damage(see photo).
Only cleaning I have done is a quick rinse in tap water and a soft towel dry.
There appears to be a (shop) grime layer which should clean pretty easily.
Based upon the completeness of the paint, I would think this badge could
register a 7.5++ /10 after cleaning.
The third photo highlights a slight ding in the edge of the badge.
Shipping will be $10, including appropriate packaging and insurance.
Tracking provided.
Cash, Venmo, personal check.
Paypal +3%
Also, thanks for the inquiries and purchase offers as well.
I have decided to put it up for sale thru DoND.
As I (now)realize the rarity of this badge, I wanted to give anyone with interest a chance
to own it.
I will look at all offers thru:
8 pm on Saturday 1/27/2024.
Assume "No Deal" until that time.
Collected from your information :
Northwest Patrol Head Badge
Arnold, Schwinn and Co.
Chicago
USA
Here is the information I have collected:
Schwinn badge from the prewar period. Schwinn mostly stopped using the oval
badges in ‘35, but you occasionally see them on ‘36 or even 1937.
So, most likely from ‘32-‘35(Thanks Onecatahula)
Pre-World War II
Brass base
Nickle plate with copper and paint
Long Dimension : 68mm
Short Dimension: 39mm
Holes C to C: 56mm
Top screw hole shows removal damage(see photo).
Only cleaning I have done is a quick rinse in tap water and a soft towel dry.
There appears to be a (shop) grime layer which should clean pretty easily.
Based upon the completeness of the paint, I would think this badge could
register a 7.5++ /10 after cleaning.
The third photo highlights a slight ding in the edge of the badge.
Shipping will be $10, including appropriate packaging and insurance.
Tracking provided.
Cash, Venmo, personal check.
Paypal +3%